Lubricant Additives

Lubricant Additive Packages -  Lubricant Additive Packages

HIPER®6120 INDUSTRIAL GEAR OIL PACKAGE

Description
Hiper® 6120 is a kind of additive package specially used for blending industrial gear oils.

Applications
Hiper®6120 is suitable for blending industrial gear oils for enclosed gears .

Characteristics

ItemSpecificationTest method
AppearanceReddish brown liquidVisual
Density, kg/L, at 15 ºC1.0120SH/T 0604
Kinematic viscosity, mm2/s, at 40 ºC56.0GB/T265
Flash Point (PMCC), ºC75.0GB/T261
Sulfur, mass%29.000SH/T0303
Phosphorous, mass%1.200SH/T0296


TREAT RATE

Quality specificationTreat rate, mass%
AIST 2241.2
AGMA 9005-E02, DIN51517 III*, FAG FE8 bearing wear test1.2
David Brown S1.53.1011.2
ISO 12925-1 CKD1.2


Performance Evaluation Data of VG220 Industrial Gear Oil

ItemTest methodResultAIST(US224)AGMA E02DIN 51517/3David Brown
Kinematic viscosity, cSt, at 40 ºCASTM D445214.4Report198-242198-242198-242
Kinematic viscosity , cSt, at 100 ºCASTM D44518.72ReportReportReportReport
Viscosity indexASTM D227097≥95≥90  
Flash Point , ºCASTM D92245≥232.2≥200≥200 
Density, g/cm3, at 15 ºCASTM D70420.897ReportReport≥ReportReport
Pour point, ºCASTM D97-9≤-9 ≤-9≤-6
API gravityASTM D28726.5≥25   
Neutralization value, mg KOH/gASTM D664
ASTM D2896
TAN:0.52
TBN:0.61
Report   
Copper corrosion, 3hr, at 100 ºCASTM D1301b≤1b≤1b≤1b≤1b
Anti-rust property
Part A-distilled water
Part B-synthetic sea water
ASTM D665
(part A and part B)
Pass
Pass
Pass
Pass

Pass
PassPass
Repor
Sediment valueASTM D91< 0.005Trace   
Water content, ppm or %ASTM D63040.01% 300ppm< 0.10% 
Foam tendency/stability
Sequence I at 24 ºC
SequenceII at 93.5 ºC
SequenceIII at 24 ºC
ASTM D91ASTM D8925/0
0/0
5/0
50/0
50/0
50/0
100/10
100/10
100/10
75/10
75/10
75/10
Water separation
oil/water/emulsion at 82 ºC
ASTM D1401
DIN ISO6614
40/40/0
10
minutes
  40/40/0
30
minutes
 
Demulsibility
% water in oil, ml
emulsion in oil, ml
free water content
ASTM D27111.3
0
83
≤2.0
≤1.0
≥80
≤2.0
≤1.0
≥80
 ≤2.0
≤1.0
≥60
Resistance to aging 312hr at 121ºC,
% increase in Kinematic viscosity at 100 ºC,
Sediment value after test
ASTM D2893-B3.3
0.02
≤6.0
≤0.1
≤6.0 Report
Seal test, 7days at 100 ºC using
SRE-NBR28
Volume change,%
Shore A hardness change, %
SIN ISO 18172.73  0/+10
-10/+5
 
Extreme pressure property
Weld load, kg
Load wear index
Wear scar diameter, mm

ASTM D2783
ASTM D2783
ASTM D4172(M)
(US224 method

250
47.9
0.26

≥250
≥45
≤0.35
   


Packing and handling
1.It is packed in 200 litre metal drums, flexitanks or ISO tanks. Store in dry, clean and well ventilated warehouses.
2.Recommendation: the highest handling temperature should not exceed 66 ºC (150 ºF), long-term storage temperature should not exceed 38 ºC (100 ºF).
3.For the details of health and safety precautions, please see the related Material Safety Data Sheet.

SERVICE

Product Purchase and Consulting
Lubricant additives & Fluorides
Learn more >

Working hours
08:30-17:00 [Mon-Fri]

  • twitter

  • facebook

  • linkedin

lntianhe.1688.com

Contact Us

Legal Statement

Language - English
© Copyright 1999 - Tianhe Chemicals